Mx Onda MX-VC2650 Manual De Usuario E Instalacion página 43

Maintenance of the Vitroceramic
If you find that something is wrong with your board, before contacting technical
support or where you bought it, check the following:
8. No power reaching the device:
- Check if there is a power outage in your apartment;
- Check if the appliance is properly connected to electricity;
- Has the timer setting elapsed?
- If it reaches the longest cooking time and turns off automatically;
- If there is boiling liquid on the touch control panel and overflow protection devices turn off
automatically;
9. Touch control panel buttons cannot be active:
- Whether in "Child Lock", "Lo" is displayed on the timer screen;
- Whether liquid/wet cloth on the touch control panel, active overflow protection;
10. After cooking, an "H" appears on the screen:
-This is normal. The hob has residual heat warning safety functions. It will remain until the
surface is cool enough to touch.
11. After shutdown, the induction hob fan continues to work for a while:
-This is normal, this is to help the appliances cool completely.
12. Some pans make crackling or clicking noises while using the induction hob:
-This is normal, it is the sound of the induction coils during operation and depending on the
construction of your cookware, the click may be slightly different.
13. The glass is scratching:
-Check if you are using inappropriate cookware, such as cookware with rough edges.
-Check if abrasive or inappropriate scouring pads or cleaning products are being used.
14. The heating element of the ceramic hob alternately turns on and off when in operation:
-This is a normal and natural characteristic of glass ceramic. The ceramic hob programmer,
together with the thermostat or thermocouple on the heating element, can control the
operation of the hob at the set power level and prevent overheating by alternately turning the
heating element on and off.
-If you work at the highest power level, the heating element will continue to turn on for a
certain time and then turn on/off alternately.
-If you work at another lower power level, the heating element will alternately turn on and off
at a certain frequency from the beginning according to the power setting of the cooking
zone.
18