Mx Onda MX-VC2650 Manual De Usuario E Instalacion página 44

TROUBLESHOOTING
Problem
E1/E2
E3
E5
FACILITY
Make a hole in the countertop based on the following suggestions:
• You must leave at least a minimum of 5 cm around the hole, free of obstacles
(furniture, appliances, etc.).
• The thickness of the countertop is at least 30 mm.
• Choose heat-resistant countertop material to avoid deformation caused by heat
radiation from the glass-ceramic hob.
L(mm) W(mm)
590
Possible causes
Abnormal
supply
voltage
Pan sensor high
temperature
IGBT temperature
sensor high
temperature
H(mm)
520 52
Please check if the power supply is normal.
Turn on after the power supply is normal.
Check if there is no liquid in the pan,
fill it with liquid and then restart.
Please restart after the induction cooktop
cools down.
D(mm) A(mm)
555+5
48
19
To do?
B(mm) X(mm)
495+5
50 min.
-0 -0
Junta