Publicidad
Idiomas disponibles
Idiomas disponibles
Before installing the ceramic hob, make sure that
•
The countertop surface is smooth and level, and no structural elements
interfere with space requirements.
•
The countertop is made of heat-resistant material.
•
If the ceramic hob is installed on top of an oven, the oven must have a built-in
cooling fan.
•
The facility will comply with all permitting requirements and applicable rules
and regulations.
•
The electrical installation complies with local safety rules and regulations and
incorporates a suitable isolating switch or circuit breaker that provides total
disconnection from the electrical network.
•
The isolating switch or circuit breaker must be suitable and provide an air gap
contact separation of 3 mm on all poles (or on all live [phase] conductors if
local wiring rules allow this variation from requirements )
•
The isolation switch is easily accessible to the user.
•
Consult a licensed electrician or local authorities regarding installation and
statutes if you have questions about installation.
•
Use heat-resistant, easy-to-clean finishes (such as ceramic tile) for wall
surfaces surrounding the countertop.
When completing the installation of the ceramic hob make sure that...
•
The power cord is not accessible through drawer or drawer doors.
•
There is adequate flow of fresh air from the outside of the cabinet to the base
of the countertop.
•
If the ceramic hob is installed over a drawer or cupboard space, a thermal
protection barrier is installed under the base of the hob.
•
The isolation switch is easily accessible by the user.
•
Before placing the fixing brackets.
The unit must be placed on a stable and smooth surface (use the packaging). Do
not apply force to the controls that protrude from the plate.
Easy Fit Kits
There is a pack of easy installation kits for each plate, including clips and fixing
screws. Look for the easy fit kit package first.
21
Publicidad
