The TRIP 1 or TRIP 2 is an odometer which can be
cleared and record the mileage of a trip driven over
a period of time.
The TOTAL records the total mileage traveled in
kilometers or miles. See "Instrument panel adjusting
button".
D Time display
It indicates the current time. If you need to adjust the
time, see "Instrument panel adjusting button".
E Speedometer
It indicates the current riding speed, optionally in
kilometers per hour (km/h) or miles per hour (mph).
See "Instrument panel adjusting button".
F TCS indicator light (optional)
the TCS indicator light on the instrument panel
flashes from off to on for 6s and then comes on. If the
TCS works normally, the indicator light will come on.
If the TCS is faulty, the indicator light will flash; if the
TCS is turned off, the indicator light will go off!
Instrument panel adjusting button
The instrument panel adjusting button is located on
the left handlebar switch of the motorcycle.
Briefly press the "SELECT" but-
ton to switch between TOTAL
and TRIP (TRIP 1 and TRIP 2).
Under TRIP 1 or TRIP 2, press
and hold "SELECT" to reset
the trip mileage.
Under TOTAL, press and hold "SELECT" to switch
between the kilometers and miles for the "speedom-
eter" and the "odometer" on the instrument panel.
Under TOTAL, press and hold the "ENTER" button
to enter the clock setting. Briefly press "SELECT" to
increase the time. Briefly press "ENTER" to
decrease the time. Press and hold "SELECT" to
shift. Press and hold "ENTER" to save and exit the
clock setting, and the system will automatically save
and exit the clock setting without any operation for
more than 10 seconds.
Operations of All Parts
Key
The motorcycle is provided with two keys, which
can be used to start the motorcycle and open all the
locks. One key is for service. Keep another key at a
safe place for later use.
10