Publicidad
Idiomas disponibles
Idiomas disponibles
Pull up the rear of the driver seat to see the left and
right fixing screws 6, and remove the fixing screws
to remove the driver seat. Push the seat forward
and push the snap hook 7 into the seat limit plate
8; then reinstall the fixing screws to install the
driver seat.
Instructions for Fuel and Engine Oil
Fuel
Please use unleaded gasoline. If the engine makes
a slight knocking sound, the gasoline may be gen-
eral grade fuel and must be replaced.
Notice
Using unleaded gasoline can prolong the service
life of spark plugs.
Engine oil
Please use high-purity and
high-performance engine oil
meeting the requirements of
SJ grade or higher. The fac-
tory recommended model is
S J 1 0 W- 4 0 . ( T h e l o s s o f
engine fault caused by the
purchase of fully synthetic
engine oil that does not meet the requirements will
affect the warranty of the motorcycle). Please go to
the QJMOTOR Service Center to buy special
engine oil for this motorcycle. QJMOTOR only pro-
vides special engine oil to the QJMOTOR Service
Center. The engine oil viscosity should be deter-
mined according to the temperature in the riding
area. Please refer to the figure to select the appro-
priate oil viscosity.
17
Publicidad
