Publicidad
Idiomas disponibles
Idiomas disponibles
be damaged. If you need to replace them, please
contact the QJMOTOR Service Center for help.
ABS Use and Repair Instructions
After the ignition switch is turned on, the ABS indi-
cator light on the instrument panel will come on.
After the riding speed reaches 5km/h, the ABS indi-
cator light will go off. At this time, the ABS is in a
normal working state; if the indicator light suddenly
flashes first and then remains on all the time during
driving, the ABS is not working.
If ABS is not working, please check whether the
ABS connector is installed and whether the clear-
ance between the ABS wheel speed sensor and the
tone ring is within the range of 0.5-1.5mm.
If the ABS wheel speed sensor is damaged, the
ABS indicator light will remain on, and the ABS will
not work. The ABS wheel speed sensor may absorb
some metal substances due to its degree of magne-
tism. Please keep the ABS wheel speed sensor
clean and free of foreign matters. Adhesion of for-
eign matters will cause damage to the ABS wheel
speed sensor. If the ABS system is abnormal,
please contact the QJMOTOR Service Center for
help.
Storage Guide
Storage
If the motorcycle is to be stored for a long time, take
certain maintenance measures to reduce the influ-
ence of the long-term storage of the motorcycle on
its quality.
1. Engine oil change
2. Lubricate the drive chain.
3. Empty the fuel tank and fuel injection unit as
practical as possible.
Notice
Gasoline will be deteriorated if it is stored in the
fuel tank for a long time, which may cause difficulty
in starting.
Warning
Gasoline is extremely flammable and may explode
under certain conditions. Do not smoke or gener-
ate sparks nearby the motorcycle when draining
the fuel tank.
39
Publicidad
