Singer 6038 Manual De Instrucciones página 45

SlNGER
I
8. To pass the thread through the spiral thread guide,
start operation from the left, making a circular
clockwise movement with your hand twice. The
thread shall slide inside the center of the spiral
(illustration 7).
9. Pass the thread through the last thread guide and
turn hand wheel toward you until needle is in its
highest position. Lower press foot.
10. Lower needle threader lever slightly down and pass
the thread through the guide as shown in the
illustration 8. Continue lowering the lever until
hook pass inside the needle eye.
7
8
11. Insert thread in the hook slot and lead it slightly up
(illustration 9).
12. Loose the lever slightly up and the thread will pass
through the needle eye automaticaly.
13. The thread will produce a loop. Pullloop about 10
em, opening it with your fingers.
Note: We recommend to set machine in the straight
stitch position, the needle in central and in its
highest position, and the press foot lowered to
make this operation easier.
9
~J
10