Pattern Selector Dial - Singer 6038 Manual De Instrucciones

5INOER
~
01/111
j
J /1 ff
n
<! ;~l
IJ
A B C D E F G H I
G)
•
J
J i
B C D
Position for flexible stitch patterns
Pos/cl6n parapuntos flfIJClblflS
Position pour des points extensibles
D
@
1111
j
B
c
1
2
Position for decorative stitch patterns
Pos/cl6n para puntosdflcoratlvos
Position pour des points décorati{s
Pattern selector dial
It selects the stitch type. lt has 9 positions, from "A" to "I".
The letter "A" indicates buttonhole function. Each of the
other letters has two types of stitches. Adecorative stitch
and a flexible stitch (illustration 1).
The stitch performed by the machine shall depend on the
positions of the patttern selector dial together with the
stitch length dial (illustration 2).
When the stitch length dial is among positions Oand 5, the
machine will perform decorative stitching as indicated in
the letter of the stitch selector. When the stitch length
dial is at the mark, the machine will perform the Flexible
Stitch as indicated in the letter of the stitch selector.
(illustration 2).
Check machine panel or a pattern table to learn the
stitch-letters correspondent.
I
Stitch balance selector
This selector (illustration 3) adjusts the flexible stitches.
Flexible stitches use the movement of the zigzag toge-
ther with forward and reverse movement. These stitches
are quite useful, however they require adjustments,
rnade with the help of this selector, Learn more about thís
function in the "Flexible Stitch Patterns" section (page
60). This selector also balances the left side of but-
tonhole. Reverse push button balances the right side.
3 +-
.....
~
M
+--
~
11111 I I
-----.
AA
I
+--
[ 1111111
-----.
I
•