Click on the desired radio buttons to change settings.
Language
Selected setting indicates language in which text on 3M™ Attest™ Auto‑reader 490 Web App pages will appear on the computer screen.
Pushbutton
Selecting Enable
Configuration
Selecting Disable
Buzzer
Selecting Enable
Configuration
Selecting Disable
Attest Auto-reader
Naming the 3M™ Attest™ Auto‑reader 490 may be useful in facilities with multiple units. The assigned nickname will appear on the 3M™ Attest™
490 Nickname
Auto‑reader 490 Web App Status page.
Enable DHCP
Default: setting is checked indicating the Web App will use the Dynamic IP address automatically assigned when the 3M™ Attest™ Auto‑reader 490 is
connected to the network. Remove the check if you wish to use a Static IP address assigned by your facility IT.
IP Address
Enter Static IP address assigned by IT
Gateway
Enter Gateway
Subnet Mask
Enter Subnet Mask
Primary DNS
Enter Primary DNS
Secondary DNS
Enter Secondary DNS.
MAC Address
XX:XX:XX:XX:XX:XX (Unique MAC address assigned to device. This value cannot be changed.)
Use Computer Time
Check this box if you wish to set the clock on‑board the 3M™ Attest™ Auto‑reader 490 using the computer's clock.
Attest Auto-reader
Alternatively, leave the Use Computer Time box unchecked and complete the date and time boxes to set the 3M™ Attest™ Auto‑reader 490 clock.
490 Time
After changing desired settings, click on Save Config button to save your changes. A new screen confirming the settings were successfully changed appears.
allows the user to configure the 3M™ Attest™ Auto‑reader 490 from the buttons on the unit itself.
prevents the user from being able to configure the 3M™ Attest™ Auto‑reader 490 from the buttons on the unit itself.
enables the audible alarm. The speaker icon will appear on the LCD panel.
disables the audible alarm. The speaker icon will disappear from the 3M™ Attest™ Auto‑reader 490 LCD panel.