Preparation for use
Live view
Calibration failed. Tap to recalibrate...
1x
1x
Recalibrate
Calibration failed
The calibration failed.
Cancel
Recalibrate
0.0 Nm
0.0 Nm
0.0 %
0.0 %
1
2
Live view
Calibration failed. Tap to recalibrate...
1x
1x
Recalibrate
Calibration failed
The calibration failed.
Cancel
Recalibrate
0.0 Nm
0.0 Nm
0.0 %
0.0 %
1
2
84
Live view
Live view
1x
1x
0.0 Nm
0.0 Nm
0.0 %
0.0 %
1
2
Live view
0.0 Nm
0.0 Nm
0.0 %
0.0 %
1
2
: "Calibration failed"
: "The calibration failed"
: "Cancel"
: "Recalibrate"
► Align the force measurement plate as follows:
→ The LEDs for positioning are within the outside
blue frame.
INFORMATION: LEDs that were not detec
ted are indicated by a change of the frame
colour to red in the affected corner area.
→ The crosshairs of the inner blue frame are
centred over the middle of the force measure
ment plate.
→ The hinges of the force measurement plate are
aligned with one of the two centre lines of the
crosshairs.
► Perform the alignment with both the frontal and the
sagittal camera views.
743L500 3D L.A.S.A.R. Posture