Siemens SINAMICS G130 Manual De Listas página 1122

Signal targets for E_DIGITAL
Signal Meaning
E_DIGITAL.0 Digital input 8 (DI/DO 8)
E_DIGITAL.1 Digital input 9 (DI/DO 9)
E_DIGITAL.2 Digital input 10 (DI/DO 10)
E_DIGITAL.3 Digital input 11 (DI/DO 11)
E_DIGITAL.4 Digital input 12 (DI/DO 12)
E_DIGITAL.5 Digital input 13 (DI/DO 13)
E_DIGITAL.6 Digital input 14 (DI/DO 14)
E_DIGITAL.7 Digital input 15 (DI/DO 15)
E_DIGITAL.8 Digital input 0 (DI 0)
E_DIGITAL.9 Digital input 1 (DI 1)
E_DIGITAL.10 Digital input 2 (DI 2)
E_DIGITAL.11 Digital input 3 (DI 3)
E_DIGITAL.12 Digital input 4 (DI 4)
E_DIGITAL.13 Digital input 5 (DI 5)
E_DIGITAL.14 Digital input 6 (DI 6)
E_DIGITAL.15 Digital input 7 (DI 7)
<1> Used in telegrams 390 to 396.
1 2
DO: CU_G, CU_S
PROFIdrive - E_DIGITAL interconnection
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<4>
<4>
<4>
<4>
<2> Can be set via p0728 as input (DI) or output (DO).
3 4
Interconnection [Function diagram] [Function diagram]
parameters Internal status word signal target
<3>
p2081[0] = r0722.8 -
p2081[1] = r0722.9 -
p2081[2] = r0722.10 -
p2081[3] = r0722.11 -
p2081[4] = r0722.12 -
p2081[5] = r0722.13 -
p2081[6] = r0722.14 -
p2081[7] = r0722.15 -
p2081[8] = r0722.0 -
p2081[9] = r0722.1 -
p2081[10] = r0722.2 -
p2081[11] = r0722.3 -
p2081[12] = r0722.4 -
p2081[13] = r0722.5 -
p2081[14] = r0722.6 -
p2081[15] = r0722.7 -
<3> Pre-assignment, can be freely changed.
5 6
fp_2498_54_eng.vsd
20.09.11 V04.07.00
PROFIdrive sampling time
<1>
Refer to [1020.7]
Inverted
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
<4> Only for CU320-2.
7 8
Function diagram
- 2498 -
S120/S150/G130/G150