Diving In Mountain Lakes; Altimeter; Altitude Ranges - Scubapro Aladin 2G Manual De Usuario

by microbubble accumulation (as
opposed to CNS O
dive anyway, you will have shorter no-
stop times or longer decompression
times. Moreover, the duration of the
no-dive warning at the end of the dive
can increase considerably.
3.6

Diving in mountain lakes

3.6.1 Altimeter

The altitude adjustment ->58 does not affect
altitude ranges nor any calculations.

3.6.2 Altitude ranges

Altitude icon
Altitude range 2
SCUBAPRO ALADIN 2G
Aladin 2G
over 40%) and you pressure
2
while the display is switched off. If the
computer detects a sufficient increase
in altitude, it switches on automatically
and indicates the new altitude range (1-4)
and the desaturation time. Desaturation
time indicated at this moment refers to
adaptation time at this altitude. If the dive
starts within this adaptation time, Aladin 2G
treats it as a repetitive dive, since the body
is offgassing.
Altitude is divided into five ranges, which are
influenced by barometric pressure. That is
why the defined altitude ranges overlap on
their fringes. If a mountain lake is reached,
the altitude range is indicated at the surface
(time of day display), in the logbook and
in the dive planner by a stylized mountain
and the current altitude range. Sea level to
an altitude of approximately 1000m (3300ft)
is not indicated. In the following diagram,
you can see the approximate breakdown of
the altitude ranges:
No deco data
gauge mode
3. Diving with Aladin 2G
measures the atmospheric
every 60 seconds even
Altitude ranges
Switching
at approx.
610mbar
4000m
8.85psi
13120ft
3000m
725mbar
9840ft
10.51psi
815mbar
2000m
11.82psi
6560ft
905mbar
1000m
13.12psi
3280ft
0m
31