Scubapro Aladin 2G Manual De Usuario página 128

8. Diving with two gas mixtures
1 The default display shows the pre-
dictive decompression prognosis,
which assumes the diver will switch to
the deco gas at the specified switch
depth. In the bottom left corner the
temperature is displayed unless the
current depth is 1m/3ft shallower than
the max depth, in which case the max
depth is displayed.
2 Upon pressing the right button, the
temperature and the current O
shown in the lower row. O
out after 5 sec while the temperature
remains.
3 Upon pressing the right button,
"GAS 1" or "GAS d" appears in the
middle row to indicate the currently
active gas and the MOD appears in
the bottom left corner. "GAS 1" or
"GAS d" will time out after 5 seconds
unless the right button is pressed
again.
4 In case that gas 1 is the active gas,
pressing the right button one more
time shows O
tom right corner and the decompres-
sion information in case the deco gas
is not used (decompression informa-
tion relative to gas 1 only). This is
the calculation that Aladin 2G would
switch to in case, having reached the
switch depth, the diver did not confirm
the switch. The decompression infor-
mation and the O
5 If an MB level greater than L0 is active,
pressing the right button one more
time shows the predictive decom-
pression information and in the bot-
tom left corner the currently active MB
level.
6 Pressing the right button again shows
the predictive decompression infor-
mation relative to L0 together with the
L0 symbol at the bottom left.
7 One more right button push shows
the decompression information rela-
tive to L0 if only gas 1 is used, with
the decompression information and
the O % of gas 1 blinking.
2
8 Upon pressing the right button again,
the time of day appears in the middle
row.
50
% are
2
% will time
2
% of gas 1 in the bot-
2
% blink.
2
SCUBAPRO ALADIN 2G