Scubapro Aladin 2G Manual De Usuario página 142

11. Settings
Adjusting the time of day
Time of day
You can adjust it to your time zone either
in this menu or using the UTC offset (see
above).
1. Confirm that you wish to adjust the time
of day by pushing
The hours start to flash.
2. Set the hours by pushing
3. Confirm the setting with
minutes start to flash.
4. Set the minutes by pushing
.
5. Confirm the setting with
Selecting 24 hours or AM/PM setting
1. Confirm that you wish to change the
setting by pushing
starts to flash.
2. Switch with
PM) and "off" (24h).
3. Confirm the setting with
The 24h - AM/PM setting influences the
display of the date (see below).
64
Adjusting the date
.
or .
. The
1. Confirm that you wish to adjust the date
or
2. Set the day (month) by pushing
.
3. Confirm the setting with
4. Set the month (day) by pushing
5. Confirm the setting with
6. Set the year by pushing
7. Confirm the setting with
Adjusting the display contrast
. "On" or "off"
between "on" (AM/
.
1. Confirm that you wish to adjust the
2. Set the contrast by pushing
3. Confirm the setting with
Date (24h setting)
Day / Month / Year
Date (AM/PM setting)
Month / Day / Year
by pushing .
The first day (month) starts to flash.
.
month (day) starts to flash.
.
starts to flash.
display contrast by pushing
The current setting starts to flash.
.
Low contrast: (1), high contrast: (12)
or
. The
or
. The year
or .
.
.
or
.
SCUBAPRO ALADIN 2G