Switching On The Display - Scubapro Aladin 2G Manual De Usuario

2. System and operation
Dive table

2.2.4 Switching on the display

Time of day display
14
• automatically, on submerging in water* or when
adaptation to atmospheric pressure is necessary;
• manually, by pushing
all segments light up for 5 seconds.
• Afterwards the display shows the time of the day, the O
mix and the temperature.
)
NOTE: This display is called time of day display. Most
navigation descriptions start from this display. At the
surface Aladin 2G returns automatically to this display.
If there is a remaining saturation from the last dive or from
a change of altitude, Aladin 2G also displays the "do not
fly" time, the "do not fly" icon, the current altitude range
and the prohibited altitude range (->31).
)
NOTE: When Aladin 2G is in state of rest no information
is displayed but the atmospheric pressure is continuously
monitored. If a change in altitude range is detected,
Aladin 2G switches on for 3 minutes automatically ->31.
*
Only if the option "Water contacts on" ("set 1", ->61) is chosen. See warning
->10.
or . If switched on with
2
SCUBAPRO ALADIN 2G