Scubapro Aladin 2G Manual De Usuario página 131

Submerging again after a change to
gas d:
If after a change to gas d the Maximum
Operating Depth (MOD) of gas d is
exceeded, the ppO
appear ->25.
Change back to gas 1, which is suited
for this depth, or rise to the Maximum
Operating Depth of gas d. Failure to do so
can result in oxygen poisoning.
1. Initiate the switching process by press-
ing . Aladin 2G displays "GAS 1",
MOD and the oxygen fraction of gas 1
for 30 seconds.
2. Switch to the regulator with gas 1 and
start breathing.
3. Confirm the change by pressing
"GAS 1" and the oxygen fraction of gas
1 is displayed for 5 seconds without
blinking. Afterwards the decompression
calculation will readjust accordingly.
SCUBAPRO ALADIN 2G
max warning will
2
.
8. Diving with two gas mixtures
53