Settings; Altitude Adjustment; Menu "Set 1 - Scubapro Aladin 2G Manual De Usuario

11. Settings

11. SETTINGS

11.1 Altitude adjustment

The altitude adjustment does not affect
altitude ranges nor any calculations.
Setting
• Depth alarm
• Dive time alarm
• Safety stop duration
• Maximum partial pressure of
oxygen (ppO max)
2
• Time limit to reset the O
to air
• Deco gas
• PDIS (Profile Dependent
Intermediate Stop)
• Unit system
• Water type
• Backlight illumination duration
• Audible attention signals
• Water contacts
• Reset desaturation
Starting from the time of day display push
or until "set 1" appears.
Confirm that you wish to enter into the menu
of "set 1" by pushing
Once entered into the menu you can scroll
with and
58
Adjust the altitude indication to your current
altitude.
1. Starting from the time of day display
2. Confirm that you wish to change the
3. Change the altitude in increments of
4. Confirm the selected altitude with

11.2 Menu "set 1"

With menu "set 1" or SmartTRAK you
can configure the following items (dive
functions):
Range
5 - 100m (20 - 330ft) on/off
5-195min, on/off
1-5min
1.2-1.6bar
% mix no reset / 1 - 48hrs
2
on/off
on/off
metric/imperial
on (salt water)/off (fresh
water)
2-12s ; push on / push off
on / off (SmartTRAK:
selective)
on / off
on / off
Setting the depth alarm
NO
.
through the menu.
push or until the mountain
symbol and the altitude appear.
displayed altitude by pushing
The altitude starts to flash.
10m / 50ft by pushing
Default
40m (130ft),off
40m (130ft),off
3 minutes
1.4bar
no reset
off
off
on (salt water)
6s
on
on
no reset
DEPTH
DIVE TIME
Status Alarm depth
.
or .
.
Page
58
59
59
59
59
60
60
60
60
61
61
61
62
SCUBAPRO ALADIN 2G