Movement And Transport - CHEFOOK 350 Manual De Instrucciones

respect the instructions and warnings displayed on the machine labels.

The labels are accident prevention devices and must therefore always be perfectly legible.
Should they be damaged and illegible, it is mandatory to replace them requesting
replacements from the Manufacturer.
At the end of each working shift, disconnect electrical power before cleaning or doing

any maintenance or transfer operations.
WARNING:
RISK OF CRASHING COULD STILL REMAIN ALSO IF THE MACHINE IS EQUIPPED
WITH A SAFETY PROTECTION.
DON'T INTRUDUCE ARTS OR ANY OTHER PARTS OF THE BODY TO THE INTERNAL
PROTECTION OF THE ROLLS.
TRAIN PERSONNEL TO USE THE MACHINE, BRINGING AWARE OF THE RISKS, IN
ORDER TO AVOID DANGER OF DAMAGE TO PERSONS AND PROPERTY.
2.4 WARNINGS FOR THE MAINTENANCE OPERATOR
Observe the instructions indicated in this manual.
Always use individual safety devices and other protection means.

Before starting any maintenance operations, make sure that the machine, if it was

used, has cooled down.
Disconnect electrical power before intervening on electrical or electronic parts and

connectors.
If any of the safety devices is worn or faulty, the machine is also considered faulty and

is not to be used.
3

MOVEMENT AND TRANSPORT

The machine is provided with all necessary parts in a closed package attached to a wooden
pallet with straps.
The machine must be unloaded from the transport vehicle, lifting it with suitable equipment.
To transport the machine to its installation area, use a rolling cart with suitable load capacity.
During lifting operations, avoid sudden movements.
Make certain that the lifting means have a load capacity that is superior to the weight
of the machine to be lifted.
The operator maneuvering the lifting equipment is responsible for lifting the load.
Leave a free space of approximately 50 cm around the machine to facilitate use, cleaning
and maintenance operations.
WARNING: while the machine is under working, it is
strictly forbidden to remove the security protections,
because of the presence of moving parts which can
cause hands crashing.
- 35 -