Safety Precautions - CHEFOOK 350 Manual De Instrucciones

DANGER
Make sure that children do not play with the packaging materials (for example,
plastic film and styrofoam). Suffocation danger!
4 PREPARATION OF THE INSTALLATION AREA
4.3

SAFETY PRECAUTIONS

Responsibility for operations executed in the room where the machine is installed is and
remains of the user. The user is also responsible for the execution of controls related to the
installation of the machine.
The user must comply with all local, national and European safety regulations.
The equipment must be installed on floors with adequate load capacity.
The assembly and disassembly instructions for the rolling machine are intended for
specialized technicians.
It is always recommended that users contact our assistance service for technical requests.
Prior to starting machine assembly or disassembly, the installer must respect safety
precautions in compliance with the law, and in particular must:
A) not operate in unfavourable conditions;
B) operate in perfect psycho-physical conditions and check that the individual accident
prevention devices work perfectly;
C) wear accident prevention gloves;
D) wear accident prevention footwear;
E) use electrically insulated tools;
F) make sure that the area used for assembly and disassembly is free of any obstacles.
4.4 OVEN INSTALLATION'S LOCATION
The picture below shows the minimum distances that must be respected when positioning
the machine in order to facilitate its use, cleaning and maintenance.
! The minimum distance between
the machine and surrounding walls or
other devices must be of approximately
50 cm.
Min. 50 cm
- 36 -
Min. 50 cm
Min. 50 cm
Min. 50 cm