Malfunctions; Transport And Storage; Technical Specifications - Tunturi E60 Manual Del Usuario

MALFUNCTIONS

Despite continuous quality control, defects and
malfunctions caused by individual components may
occur in the equipment. In most cases it's unnecessary to
take the whole device in for repair, as it's usually sufficient
to replace the defective part.
If the equipment does not function properly during use,
contact your Tunturi dealer/supplier immediately. Always
give the model and serial numer of your equipment.
Please state also the nature of the problem, conditions of
use and purchase date. Please check the Tunturi Warranty
booklet.
If you require spare parts, always give the model, serial
number of your equipment and the spare part number for
the part you need. The spare part list is at the back of this
manual. Use only spare parts mentioned in the spare part
list.
TRANSPORT
AND STORAGE
Please follow these instructions when carrying and moving
the cycle about, because lifting it incorrectly may strain
your back or risk other accidents:
NOTE!
Always switch the power off and unplug the
power cord before you start moving the equipment around!
Stand behind the equipment. Grip the seat with one hand
and the handlebar with the other, and set your foot on the
rear support. Tilt the equipment so that it rests on its transport
wheels. Wheel the equipment to move it, on these transport
wheels. Lower the equipment while holding on to the
handlebar and remain behind the equipment all the time.
NOTE!
Transport the equipment with caution over
uneven surfaces, for example over a step. The equipment
should never be transported upstairs using the wheels over
the steps, instead it must be carried. We recommend that
you use a protective base when transporting the equipment.
To prevent the equipment malfunctioning, store in a dry
place with as little temperature variation as possible and
protected from dust.
TECHNICAL
SPECIFICATIONS
Length 99 cm / 39 inches
Width 70 cm / 28 inches
Height 116 cm / 46 inches
Weight 45 kg / 100 lbs
This product meets the requirements of the EU's EMC
Directives on electromagnetic compatibility (89/336/EEC)
and electrical equipment designed for use within certain
voltage limits (73/23/EEC). This product therefore carries
the CE label.
This product meets EN precision and safety standards
(Class HA, EN-957, parts 1 and 5).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications without
notice.
NOTE!
The instructions must be followed carefully in
the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence
of the assembly, adjustment and maintenance instructions
described herein. Changes or modifications not expressly
approved by Tunturi will void the user's authority to
operate the equipment!
WE WISH YOU MANY ENJOYABLE TRAINING SESSIONS WITH
YOUR NEW TUNTURI TRAINING PARTNER!
11
E60 - OWNER'S MANUAL ENGLISH