Unox ChefLux Manual Instrucciones página 12

This function can be used to let the food rise
inside the cooking chamber or to delay the
beginning of the cooking.
>> Cooking chamber temperature control
You can set any temperature between 0 and
260°C.
Turn the knob to set the cooking temperature.
Position SET shows the desired set temperatu-
re. The position with the symbol "eye" allows
you to check the temperature you have in rea-
lity in the cooking chamber at the moment you
control the datum.
While the oven is working, the display conti-
nuously switches from the set to the real tem-
perature every 4 seconds.
>> Food core temperature control
You can set any core temperature between
0°C and 100°C.
Turn the knob clockwise to set the temperature
of the core temperature control probe.
Position SET shows the desired set temperatu-
re. The position with the symbol "eye" allows
you to check the temperature your have in
reality at the core of the food you are cooking.
While the oven is working, the display conti-
nuously switches from the set to the real tem-
perature every 4 seconds.
When the core temperature reaches the set
one (SET, programmed temperature), the oven
stops working (even though the set cooking
time is not finished yet).
You can read the core temperature even
though you did not set the core temperature
control; in this case the set core temperature
is 0°C.
Coocking with the function DELTA T (∆T)
ENGLISH
11
DELTA T is a particular type of cooking where
the difference between the core temperature
(measured with the core temperature con-
trol) and the cooking chamber temperature
remains always the same. In other words, the
temperature inside the baking chamber is the
result of the additino of a fixed DELTA T (chosen
and set by the user) to the core temperature of
the food.
In case you use DELTA T, the division of the
time into 4 basic periods is deactivated; the
total cooking time is unknown as the cooking
stops when the core temperature of the food
reaches the set one.
System to set the temperature
a) Cooking chamber temperature only.
b) Cooking chamber temperature + core tem-
perature control.
c) Core temperature control + Delta T.
NOTE:
When you use solution "b", DELTA T cannot be
used;
When you use solution "c", you cannot set the
cooking chamber temperature
To set the different temperatures required
by the chosen solution push the key you find
on the left side of the temperature regulation
knob.
"START / STOP" key
The "START / STOP" key has to be used when
you want to start the cooking. Furthermore, it
can to be used when you want to pause the
appliance: to continue the cooking program
from the point it stopped, press again START
/ STOP.
When the oven is working the led is lit up. When
the oven is turned on, but it is not working, the
led is turned off.
"+1" key
When the oven is working in the manual ver-
sion, every time you push this key you add 1
minute to the total set cooking time.
When you use the oven in the digital version
and you are using the saved programs, this
key can be used only at the end of the last
ENGLISH