Protector CABLOC Manual Del Usuario página 24

Component:
The System
Cabloc Traveller / Cabloc Pro
IMPORTANT: Extreme working conditions (harsh environment, prolonged use, etc.) may require increasing the frequency of
inspections. DO NOT USE THE SYSTEM IF ANY DOUBTS REMAIN AFTER PRE USE CHECKS HAVE BEEN CONDUCTED
Date
Issue Date: 17/07/2014
Table 1 - Maintenance Check Sheet
Date Of First Use
Inspection:
Visual inspection. Check system for signs of a
fall event.
Check system tag is present and legible
Check all components for signs of damage,
rusting or severe corrosion
Check all components are isolated from disimilar
metals
Check integrity of structure
Check split pins present and in good condition
Check fasteners are correctly tightened. Use
Torque Wrench as required
Clean system as necessary
Check cable condition for fretting, corrosion,
signs of contamination and damage
Check cable tension
Inspect brackets for damage, corrosion, or rust.
Look for cracks, bends, or wear that could affect
strength or operation of the system.
Check inline energy absorbing elements are intact
Check intermediate brackets
Check clamps are not overtightened.
Check that the spring is functioning by lifting the
cam arms and letting go, the cam arms should
spring back.
Check the rivet and rivet nuts for signs of damage
Check the gate of the karabiner opens, closes
and locks
Check for cuts, abrasions and fraying
Check that there is no visible damage to the
connection between the integral energy absorber
and Cabloc traveller and the integral energy
absorber and karabiner.
Periodic Examination And Repair History
Reason for entry
(Periodic examination
or repair)
Pre Use Check
Defects noted repairs
carried out and other
relevant information
Page 24 of 101
Date Of Purchase
Every Year
After a Fall
Name and signature
of competent person
Yes /No
/
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Periodic examination
next due date
Revision: F