Stoelting VB 35 Manual Del Usuario página 21

The machine must be positioned on a solid, level and even
heat sources.
Keep the machine air inlets clear to allow adequate air cir-
culation around it.
For safety reasons and to avoid damage during transportation, some machine components are removed from it. Therefore,
• Install the opening lever (A) on the extraction door. Place it in the seat
while holding the lever in the operating position.
• Install the extraction door chute below the extraction door using the
• Position the chute and tighten the 2 clamp screws (D) below it.
TIGHTEN THE CLAMP SCREWS, CHECKING THAT THERE IS NO PLAY IN THE CHUTE.
• There are two slots (F) in the back of the basin support. Fit them over
the clamp screws (G) partly tightened on the front panel. When the
basin support is in place, tighten the screws.
• Place the mat (H) supplied on top of the basin support.
Chapter 4
A1
A
C
H
G
F
B
D
21