MACHINE DOES NOT OPERATE OR OPERATION IS INTERRUPTED
THE MAIN SWITCH IS IN THE ON POSITION (1), THE POWER
WARNING LIGHT DOES NOT SWITCH ON.
The plug is not inserted in the
socket correctly.
NO
The socket is faulty.
NO
No electric power in the network or
in the socket.
NO
A fuse designed to protect the
auxiliary electrical system has
blown.
NO
The power cable is damaged.
NO
Contact the technical assistance
service
56
YES
YES
Check that the disconnecting switches,
all-pole (phase & neutral) isolating switch-
es and residual current operated circuit
breakers (cut-outs) on the electrical sys-
YES
tem, upstream of the socket, are closed.
no one is carrying out electrical repairs.
YES
overload and substitute the blown fuse
tions and level of protection.
Contact the technical assistance service.
by opening the disconnecting switch up-
YES
stream of it, then disconnect the plug and
contact the Technical assistance services.
DO NOT TOUCH DAMAGED ELECTRIC CA-
BLES BEFORE CUTTING OFF THE ELECTRIC-
technician.
-
ITY SUPPLY!