Interpump Group Pratissoli SM Serie Manual De Reparación página 33

Extract the seal ring from the reduction gear cover, working
from the inner side of the cover (pos. , Fig. 11).
Unscrew the screws holding in the ring gear (pos. , Fig. 12)
and remove it (pos. , Fig. 13).
Remove the ring gear (pos. , Fig. 14). If necessary, it is
possible to use an extractor hammer to be applied on the 2
M8 holes (pos. , Fig. 14).
Fig. 11
Remove the tab from the shaft (pos. , Fig. 15).
Fig. 12
Remove the ring gear support ring (pos. , Fig. 16).
Fig. 13
33
Fig. 14
Fig. 15
Fig. 16