Interpump Group Pratissoli SM Serie Manual De Reparación página 35

Position the 3 grub screws or M8 threaded screws (pos. ,
Fig. 23) with the function of extractors in the holes and two
sufficiently long M10 screws with the function of supporting
the reduction gear box (pos. , Fig. 23).
Slowly screw in the 3 M8 screws (pos. , Fig. 24) to prevent
that the box can tilt too far and get locked in the housing.
Remove the box while supporting the shaft to prevent
damage (pos. , Fig. 25).
Fig. 22
Unscrew the bearing cover fixing screws from the opposite
side (pos. , Fig. 26 and Fig. 27).
Fig. 23
Fig. 24
35
Fig. 25
Fig. 26
Fig. 27