Interpump Group Pratissoli SM Serie Manual De Reparación página 41

Insert the side seal on the bearing cover (pos. , Fig. 57) and
lift the bend shaft to favour cover insertion (pos. , Fig. 58).
Assemble the bearing cover (and relative seal) using an
extractor hammer (pos. , Fig. 59)
Position the bearing cover in such a way that the
"Pratissoli" logo is perfectly horizontal.
Fig. 56
Tighten the 8 M10x30 screws (pos. , Fig. 60).
Calibrate the screws with a torque wrench as indicated in
chapter 3.
Fig. 57
From the opposite side, insert the side seal on the reduction
gear box (pos. , Fig. 61) and lift the bend shaft to favour
cover insertion (pos. , Fig. 62).
Fig. 58
41
Fig. 59
Fig. 60
Fig. 61