Control box weighs between 25-40 pounds.
removing box.
6. Remove box by lifting with handles.
7. Remove protective covering from bayonet electrical connectors prior to reinstallation of
new unit.
10.4 Internal Batteries
Electrical shock hazard exists with access covers removed; use caution when working
in exposed areas. Servicing and replacement of batteries should only be performed by
trained personnel.
MIZUHOSI 2009
WARNING:
Figure 47: Lift by handles to remove box
WARNING:
Figure 48: Battery location (base cover removed)
Use proper lifting technique when
65
NW0508 Rev. D