10.7 Femur Lift Assembly, Left/Right
Part number: Right 6875-600/Left 6875-601
1. Disconnect twist-lock 24 VDC electrical connector from damaged femur lift cylinder.
2. Remove femur lift locking knob.
10.8 Caster(s)
Part number: ND0443
1. Loosen the four 3/8 x 1-inch caster mounting bolts at the damaged caster.
2. Raise table base off floor approximately 1-1/2-inches.
3. Remove the four 3/8 x 1-inch caster mounting bolts.
4. Remove damaged caster.
Caster pads
Part number 6850-75
MIZUHOSI 2009
69
NW0508 Rev. D