Table Lift Assembly - Mizuhosi hana 6875 Manual Del Propietário

10.5 Table Lift Assembly

Part number NL1254
1. Cover removal.
a. Remove top-bellows bolts.
b. Remove bottom-bellows bolts.
c. Remove ten #6 screws from top sheet metal cover.
d. Remove five 10-32 screws from top sheet metal cover.
e. Lift off sheet metal covers (bottom sheet metal covers remain but telescope down).
2. Using a small hydraulic jack under the table lift column, take weight off of the damaged
table lift cylinder.
3. Disconnect the damaged table lift cylinder 24 VDC electrical connector.
4. Remove four 10 mm shoulder bolts from damaged table lift cylinder using 7 mm hex key.
MIZUHOSI 2009
Figure 49: Table lift assembly
67 NW0508 Rev. D