3
- SPECIFICATIONS
3.1 Product identification
The details used to identify the motorcompressor are stamped on the nameplate (1).
3.2 Product description
Introduction
The motorcompressor is used to operate pneumatic tools for pruning, for harvesting olives and coffee and for clipping long-haired
animals. It can also be used for inflating, painting, blowing and for operating any other pneumatic tools.
The motorcompressor is driven by a 4 stroke engine. The self-propelling system is controlled by the operator manually. The
motorcompressor is provided with a pneumatic self-regulating device, which stresses the engine only during the tank recharge,
thus saving fuel and parts wear.
3.3 Outfit
- Use & Maintenance Manual for the motorcompressor
- Use & Maintenance Manual for the engine
- Recipient with nozzle for oil filling
- Hose reel support pin
3.4 Recommended use
The motorcompressor is designed to supply compressed air as described above. If used improperly, it can be dangerous to the
operator. If the motorcompressor is not used as recommended, the manufacturer is entitled to void the warranty.
WARNING!
If it is not used for the purposes it was designed for, the motorcompressor may cause serious injury to personnel and
bystanders and damage to equipment and things.
Via Lazio n 21
Zola Predosa Bo Italy
TIPO
MOD.
COD.
N°MATR.
ANNO
kg
21 - 72