Tabla de contenido
Publicidad
FRAME MOUNTING SYSTEM
REAR CHILD SEAT FOR BICYCLE - FRAME MOUNTING SYSTEM
For child safety and for your peace of mind, Bobike has developed the perfect child
carrying solution that's suitable for a wide range of adult bicycles.
Our ergonomic child seats are all built with safety and comfort as the primary goals.
In this manual, you will find information on attaching the child bicycle seat to the frame
of your bicycle.
Carefully read the manual for a safe and correct installation of the child bicycle
seat.
TECHNICAL FEATURES
• This child bicycle seat must not be mounted to bicycles fitted with rear shock
absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such as Mopeds
and Scooters.
• This child bicycle seat must not be mounted in bicycles with triangular, square or
carbon fiber frames.
• This child bicycle seat must be assembled on bicycles with round and oval frames with
diameters ranging from Ø28 to Ø40 mm.
• The child bicycle seat must be assembled on bicycles with wheels with diameters of
26" and 28".
• This child bicycle seat is only suitable for carrying children with a maximum weight of
22 Kg (and children with recommended ages ranging from 9 months to 5 years of age -
with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed the
maximum permitted load permitted for the bicycle. Information on the maximum
load can be found in the operating instructions of the bicycle. You can also contact the
manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment of such
additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle rider does
not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts for optimum
comfort and safety of the child. It's also important that the seat does not slope forward,
so that the child does not tend to slide out of it. It's also important that the backrest
slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle seat mounted.
• Check the instructions of the bicycle, and If you have any doubts on fitting the
child bicycle seat to your bicycle, please contact your bicycle supplier for further
information.
TABLE OF CONTENTS OF PRODUCT
A. Main seat | B. Safety belt | B1. Safety lock | B2. Belt adjuster | B3. Central belt adjuster
| B4. Safety buckle releases | B5. Safety buckle socket | B6. Hole for belt adjustment |
C. Safety belt for bicycle frame | D. Footrest strap| E. Footrest | E1. Footrest safety lever
| E2. Footrest peg | F. Centre of gravity | G. Cushion | H. Metallic bracket | I. Mounting
block | I1. Screws M8x45 | I2. Plastic mounting block | I3. Release button | I4. Metallic
mounting plate | I5. Allen key no. 5 | I6. Lock washer M8x16 | I7. Safety device indicator |
I8. Protective rubber | J. Metallic mounting Kit | J1. Metallic mounting plate | J2. M8x25
screw | J3. Metallic bracket support / Mobile stand | K. Batch serial number
ASSEMBLY INSTRUCTIONS
1. Cut the plastic straps that hold the mounting block (I).
2. Use the allen key No. 5 (I5) to loosen and remove the Metallic bracket support/
Mobile stand (J3). Desingage the Metallic bar support (J3) by pulling it backwards.
After removing this part (J3) you will no longer need to use it, so we give it a functional
purpose – you can keep it and use it as a mobile stand.
4
EN.
Publicidad
Tabla de contenido
