Tabla de contenido
Publicidad
UPDATING REPORTS
Release A -__PCN: 12G0024__ -
First Release
List of changement from revision
Chapter 2.6
(changed).
Chapter 11. Technical data
List of changement from revision
PCN: 12G0276
Chapter
Installation
List of changement from revision
PCN:13G0190
Chapter
3. Blade adjusting feauture (updated).
List of changement from revision
PCN:13G0219
Single fase Inverter informations
List of changement from revision
PCN: ___
Electrichal data for Inverter version completed
on chapters; Installation, Technical data.
EAC Logo added on page 3
Cod.: EAZ0033G51A
0
4
February
2012
date:
B
05/2012
(updated).
date:
C
01/2013
pag. 12-15
(added)
date:
D
06/2013
date:
E
09/2013
(added)
date:
E1
03/2014
PCN:14G0041
Contents • General
Contents
1. General .............................................................. 4
2. Installation of the machine ................................ 12
3. Connection of the machine ............................... 16
4. Bead breaking ................................................... 18
5. Clamping wheels ............................................... 22
6. Setting the mounting head ................................ 26
8. Demounting a tyre ............................................ 30
9. Mounting a tyre ................................................. 32
10.Inflating a tyre ................................................... 34
11. Maintenance ..................................................... 40
12.Technical data ................................................... 42
13.Unit ................................................................... 44
1. General
1.1 Tips for the reader
Special symbols are used in this manual to facilitate
reading and understanding of pictures and written
instructions:
Bullets indicate where an action/operation is required.
Safety rules are highlighted in grey.
1.2 Scope
T 3300-24 / T 3300-24 BS
The T 3300-24/BS tyre changer is designed to demount
and mount tyres with a diameter of between 10 and
24".
Clamping ranges for outer and inner clamping are:
Outer clamping
Inner clamping
Clamping jaws are available under optional extras for
clamping steel wheels with a rim diameter of 8",
motorcycle wheels of 12" to 23" rim diameter and light-
truck wheels up to 17.5" rim diameter and asymmetrically
arranged drop base.
Accessories
A series of accessories are normally available for the
machine. All the accessories are listed in the
attached document (fig. 0):
ACCESSORIES PLAN
Code: see Fig
The document lists:
- Accessories supplied with the machine; "S".
- Accessories available on request; "O".
- Accessories that do not apply to the model consulted; "-".
• Use the codes in the list for the purchase orders.
Operation manual
Page
10 to 24" rim diameter
12 to 24" rim diameter
T 3300-24
Publicidad
Tabla de contenido
