Descargar Imprimir esta página

Updates Of Version P4; Technical Characteristics Of Product - Roger Technology EDGE1/BOX Instrucciones Y Advertencias Para El Instalador

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 158
4

Updates of version P4.20

1. Improved inverter management for High Speed motors
5

Technical characteristics of product

MAINS POWER VOLTAGE
MAXIMUM MAINS POWER ABSORPTION
INRUSH POWER
FUSES
CONNECTABLE MOTORS
MOTOR POWER SUPPLY
MOTOR TYPE
MOTOR CONTROL TYPE
RATED MOTOR POWER
MAXIMUM MOTOR POWER
MAXIMUM POWER, FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
MAXIMUM POWER
GATE OPEN LIGHT POWER
ELECTRIC LOCK POWER
MAXIMUM ACCESSORY CURRENT ABSORPTION
OPERATING TEMPERATURE
DEGREE OF PROTECTION
PRODUCT DIMENSION
(*) The electric lock output provides a voltage of 36Vdc nominal (max 40Vdc) modulated to 30% (30% ON, 70% OFF).
The device to be connected must therefore be able to withstand a maximum voltage of 40Vdc.
The total of the absorption values of all the accessories connected must not exceed the maximum power
values shown in the table. The values are guaranteed with original ROGER TECHNOLOGY accessories ONLY.
All the connections are protected by fuses (refer to the table). The courtesy light requires an external fuse.
EDGE1/BOX
230 Vac ± 10% 50 Hz
230 W
600 W
F1 = 20A (ATO257) motor power circuit protection.
F2 = 4A (ATO257) electric lock protection
F3 = 3A (ATO257) accessories power supply protection
F4 = T2A (5x20 mm) primary transformer coil protection
2
36 Vac ,
sinusoidal drive brushless (ROGER BRUSHLESS)
60 W
250 W
25 W (24 Vdc)
50%
100 W 230 V
3 W 24 V
15 W 12 V
(medium voltage) (*)
20 W 24 V
(750 mA)
IP54
EDGE1/115/BOX
115 Vac ± 10% 60 Hz
(potential free contact)
55

Publicidad

loading

Este manual también es adecuado para:

Edge1/115/box