Parameters Menu - Roger Technology EDGE1/BOX Instrucciones Y Advertencias Para El Instalador

13

Parameters menu

PARAMETER
PARAMETER
Selecting automation system model
WARNING! If this parameter is not set correctly, the automation system may not function properly.
N.B.: in the event of a reset to restore the default parameters, this parameter must be set again manually.
BE20/200/HS IRREVERSIBLE HIGH-SPEED piston.
BR20 IRREVERSIBLE piston.
BH23/282
BR21/351
BR21/361
BR21/362
SMARTY 5 or SMARTY 7 IRREVERSIBLE piston.
SMARTY 7R REVERSIBLE piston. IMPORTANT: set
SMARTY 5R5 REVERSIBLE piston. IMPORTANT: set
SMARTY 4HS IRREVERSIBLE piston HIGH-SPEED.
BH23/252/HS - Gear motor with IRREVERSIBLE HIGH-SPEED articulated arm.
BR21/351/HS - Underground IRREVERSIBLE HIGH-SPEED gear motor.
BR21/361/HS - Underground IRREVERSIBLE HIGH-SPEED gear motor.
BR20/400 IRREVERSIBLE piston.
MONOS4 IRREVERSIBLE piston.
BR20/400/R - REVERSIBLE piston.
Automatic closure after pause time (from gate completely open)
Disabled.
From 1 to 15 of gate closure attempts after photocell is triggered.
Once the number of attempts set is reached, the gate remains open.
Automatic gate closing after mains power outage
Disabled. The gate does not close automatically when mains power is restored.
Enabled. If the gate is NOT completely open, when mains power is restored, the gate closes after a 5 second warning
Selecting step mode control function (PP)
The automatic closing timer restarts if a new step mode command is received.
Step mode commands are ignored while the gate is opening. This allows the gate to open completely and prevents the
gate from closing when not required.
If automatic closing is disabled (
68
VALUE
IRREVERSIBLE articulated arm.
IRREVERSIBLE gear motor.
IRREVERSIBLE gear motor.
IRREVERSIBLE gear motor.
), the condominium function automatically attempts a closing manoeuvre
and .
and .
). The gate closes in "position
.