How To Connect The Open Collector Input Of The Controller - Agilent TPS-compact Instrucciones De Uso

Technical Information

How to Connect the Open Collector Input of the Controller

Here below there are the typical connections of the open collector input of TPS-
compact to an external system. Two cases are considered:
1 the customer supplies the 24 Vdc.
2 the customer does not supply the 24 Vdc.
Please note that on the connector a 24 Vdc, 30 mA, a GROUND signal and the open
collector pin are available.
Figure 68 Case 1
Agilent TPS-compact User Manual 209