How To Connect The Outputs Of The Controller; J6 - Serial - Agilent TPS-compact Instrucciones De Uso

Technical Information

How to Connect the Outputs of the Controller

The following figure shows a typical logic output connection (relay coil) but any
other device may be connected e.g. a LED, a computer, etc., and the related
simplified circuit of the controller. The figure example refers to the programmable
set point signal on pins 11 and 9.
Figure 71 Typical output connection 1
J6 – Serial
Figure 72
This is a 9 pin D-type serial input/output connector to control via an
RS 232 or RS 485 connection the TPS-compact.
212 Agilent TPS-compact User Manual