Rs 232/Rs 485 Communication Description; Communication Format - Agilent TPS-compact Instrucciones De Uso

Technical Information

RS 232/RS 485 Communication Description

Both the RS 232 and the RS 485 interfaces are available on the connector J6.
The communication protocol is the same (see the structure below), but only the
RS 485 manages the address field. Therefore to enable the RS 485 is necessary to
select the type of communication as well as the device address by means of the
software.

Communication Format

8 data bit

no parity

1 stop bit

baud rate: 600/1200/2400/4800/9600 programmable.

Figure 73 RS 232 Connection
214 Agilent TPS-compact User Manual