Symbols On The Battery Charger; Operating States/Error Signals; Signals For Operating States - Ottobock Genium 3B1-2 Instrucciones De Uso

14.1.2 Symbols on the battery charger

Legal manufacturer
Lot number
Declaration of conformity according to the applicable European directives
Protection against penetration of solid foreign objects with a diameter greater than
1 mm, no protection against water
Protect from moisture
In some jurisdictions it is not permissible to dispose of these products with unsor­
ted household waste. Disposal that is not in accordance with the regulations of
your country may have a detrimental impact on health and the environment. Please
observe the instructions of your national authority pertaining to return and collec­
tion.

14.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.

14.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1x short
Mode switching
INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
Beep signal Vibration
signal
1x short 1x short
1x long 1x long
84 | Ottobock
Vibration signal
3x long
1x before beep signal Self-test completed successfully, product is
Additional action per­
formed
Mode switching using the
Cockpit app or remote con­
trol
Bouncing on the forefoot fol­
lowed by unloading the
prosthetic leg
Event
Charging mode started (3 sec. after connecting
the battery charger)
operational
Event
Mode switching performed using
the Cockpit app or remote con­
trol.
Bouncing pattern recognised.