Vascutek Thoraflex Hybrid Instrucciones De Uso página 10

Figure 9 – Splitter Removal
Guide Wire Removal
If a guide wire was used in the implantation of the device it should be removed from the system by this stage. This
will allow it to be removed while the device is held in position by the system.
III. Release Wire Removal (Release Action III)
Fully release the graft from the delivery system by pulling the red release clip and attached wire out of the delivery
system handle (Figure 10). The release wire should be pulled out proximally, in line with the delivery system
handle. The distal end of the stent graft will now be released from the delivery system.
Figure 10 – Release Wire Removal
10