Network Settings - Astute Medical ASTUTE140 METER Manual Del Usuario

Installation
7. To change the numeric LIS settings (Timeout interval, IP Address, and Port
Number), use the
the key to first delete any existing numeric entries, and then enter the
new numeric entries using the numeric keypad or an external keyboard (if
connected). NOTE: the IP address must be entered in the following format:
###.###.###.###.
To specify whether test results will be automatically transmitted to the LIS, use
the
between No and Yes.
8. Once all of the entries have been confirmed, press the right soft key to accept all
entries.

Network Settings

To configure the network settings, perform the following steps:
1. Press the
2. Use the navigation keys to highlight the Supervisor Menu icon.
34
keys to highlight the field(s) to be changed. Use
keys to highlight Auto Transmit (LIS). Use the
key to display the Main Menu.
ASTUTE140
Figure 29.
Correct IP Address format
keys to toggle
Figure 30.
Main Menu screen with
Supervisor Menu icon
highlighted
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
Meter
®