Refco TAP Guía De Instalación Y Funcionamiento página 13

Instruction Manual TAP / Temperature And Pressure Gauge
Display
TAP1...TAP6
R000
P1...P6
To/c
T1..T6
ΔT
Transport, packaging and storage
Transport
The TAP is delivered from the factory in a plastic box, with or without
different accessories as ordered. Inspect the TAP for any potential
transportation damage. Any obvious damage should be reported to
the vendor immediately. TAP is a high-grade instrument and should
be transported and stored in a box, for long term protection.
Packaging
Retain the original packaging as it provides optimum protection for
transportation of the device (e.g. onward dispatch of the device,
sending it for repair etc.).
ID of TAP pressure gauge
T1 to T6
Refrigerants menu
Menu with stored refrigerant charts
bar, psi Pressure units
kPa, MPa
(P) = Pressure
Temperature units
°C
(To = Evaporating temperature)
°F
(Tc = Condensing temperature)
Temperature units
°C
(T) = Temperature from TAP-
°F
CLAMP
K Temperature difference
°F (ΔT) = Temperature difference
Settings
Transmiting symbol
Flashing during connection setup.
Constant after connection.
Low battery indication of TAP pressure gauge
If the battery charge level < 30%, the
battery empty symbol will appear on display.
The batteries must then be replaced within
two hours in order to guarantee full function.
Low battery indication of connected
TAP CLAMP
English
13