Refco TAP Guía De Instalación Y Funcionamiento página 14

English
Storage
- Storage temperature: -20 °C to +60 °C
- Humidity: 0 to 90% relative humidity (no condensation)
Setup and operation
TAP CLAMP
Set-up
TAP CLAMP compartment of the TAP CLAMP.
Switch on
Set
TAP CLAMP
ID
Set
Auto Off
Set unit
14
Instruction Manual TAP / Temperature And Pressure Gauge
Instruction Manual TAP / Tempera
The TAP must not be used for
The TAP should not be expose
Insert 3 x 1.5 V (AAA) batteries in the battery
Remove refrigerants from the
Ensure the batteries are inserted observing the correct
polarities. Do not leave dead batteries in the battery
Purpose and use
compartment. If you will not be using the TAP CLAMP
for a long period of time, remove the batteries from the
battery compartment.
The TAP has been developed for m
- Press [ON/OFF] button, to switch on device.
and stationary refrigeration equipme
After start image, display appears
TAP is only designed for temporary
- Press [ON/OFF] + [UNIT] button same time < 1 sec.
measurement unit.
to enter set mode.
- Scroll from T1 to T6 by pressing [UNIT] button
< 1 sec.
Scope of delivery
- Press [ON/OFF] button ≥ 1 sec. to confirm and
return to main display.
Information about the various model
Note:
Chosen ID will be transmitting to pressure gauge and is
REFCO catalogue or at
shown on display.
Play Store.
- Press [ON/OFF] + [UNIT] button same time > 1 sec.
to enter set mode.
- When Auto Off mode is activated timer symbol
Technical Data
appears.
- Scroll from 10 / 20 / OFF by pressing [UNIT] button
< 1 sec.
Temperature clamp
- Press [ON/OFF] button ≥ 1 sec. to confirm and
return to main menu.
Property
Note:
Thermocouple:
Factory default Auto Off is set to 20 min.
Subsequent the symbol and the auto off time
Temperature range:
disappear from display.
Accuracy of
- Press [UNIT] button < 1sec.
measurement:
- Switch between °C and °F by using [UNIT] button
< 1 sec.
Resolution:
Temperature units:
www.refco.c
Value
K-type
-40 °C to
+/- 1 °C /
0.1 °C / 0
°C / °F