SWM SIX6 500 Manual De Instrucciones página 37

AIR FILTER CHECK AND/OR REPLACEMENT
- Remove the right panel as described in the relevant
paragraph.
- Unscrew the five screws (1) and remove the filter
cover (2).
- Remove the filter (3) and check its condition; to
clean it, blow it with compressed air from outside
to inside; if it is very dirty, replace it.
- Reassemble all parts, proceeding in reverse order.
1
2
3
3
SPARK PLUG CHECK
Spark plug (3) gap shall be 0.6 -0.8 mm.
A wider gap may cause difficulties in starting the
engine and overload the coil.
A gap that is too narrow may cause difficulties when
accelerating, when idling or poor performance at low
speed.
To reach the spark plug, carry out the following
removal operations:
- Remove the cap (1).
- Insert the wrench provided (2) and remove the
spark plug (3).
1
SIX DAYS
2
37 -
EN