SWM SIX6 500 Manual De Instrucciones página 58

SIX DAYS
HEADLIGHT ADJUSTMENT
When checking the proper aiming of the head- light
beam: inflate tyres at the right pressure, have
a person sit astride the motorcycle and set the
motorcycle perpendicular to its longitudinal axis
at 10 metres from a wall or screen. Then trace a
horizontal line at the height of headlight centre and
a vertical one, in line with vehicle longitudinal axis.
If possible, execute this operation in a shaded place.
When the low beam is on, the upper edge between
dark and lit zone should be at 9/10th of headlight
2
centre from ground
Beam height can be adjusted as follows:
- Loosen the two screws (1).
- Adjust the position of the headlight (2) and then
tighten the screws (1).
1
58 -
EN