English
Owner´s manual
• Loosen the regulating handle, adjust the handle
frame to suitable position, screw into the
regulating handle, tighten the wing nut.
• Loosen the locked handlebar and standpipe,
standpipe and handle frame can be rotated in
330 °, which has 18 positions. Then tighten the
locked handle, operate the rotary tiller through
adapting to different position.
2.2 Adjustment of tilling depth
• Adjust resistance rod downwards, tilling depth will increase. Adjust resistance rod upwards,
tilling depth will decrease.
3. STARTING THE ENGINE
1. Start procedure
WARNING! Before starting engine,
shift lever of gear box and tiller box
must be placed on neutral position,
clutch handle is clenched (i.e. loosen
tension pulley)
1.1 Turn the fuel valve to ON position.
1.2 Close the choke lever.
WARNING! Do not use the choke when the engine is warm or the air temperature
is high.
1.3 Move the throttle handle slightly to the left.
36
(1) Choke lever
(2 ) Clos
(1) Fuel valve
(2) On
(3) Drain bolt
(1) throttle handle
Fig. 4