Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
4.4 Use brush to clean the carbon on spark eliminator mesh enclosure.
WARNING!
re.
ATTENTION!
or be broken, if so,
please change.
4.5 Assemble spark eliminator according to the contrary process of disassembly.
5. Adjustment of carburetor idling speed
5.1 Start the engine, and wait until it arrive right temperature.
5.2 When engine is working in idling speed, adjust valve bolt to
get the standard idling speed.
Standard idling speed: 1500±150r/m
6. Oil level (accessories are optional)
The oil level system is used to avoid to damage engine caused
by oil shortage in the crankcase. When oil is below the safe line,
The oil level system will automatically stop the engine (even if
the switch is still on ON position ).
7. Maintenance method of rotary tiller
During working, due to rotating, abrasing and load changing, bolts will become loose and
parts will be worn. These changes will destroy the proper working condition, create abnormal
fitting clearance, degrade output power of diesel engine, increase oil consumption, lead to the
maladjustment of spare parts and increase malfunctions of mini tiller. These all will seriously affect
the working efficiency. To decrease the frequency of the above-mentioned accidents, maintenance
must be done strictly and regularly to keep the tiller in a good working state and prolong its life.
42
Be careful not to damage mesh enclosu-
Spark eliminator must not have holes
(1) Restrictor screw
Publicidad
