1.2 If belt tension degree is not in the normal range, it's necessary to adjust.
To loosen the four fixed bolts of the engine, if the belt is too loose, we make the engine move
forward, if the belt is too tight, we make the engine move backward, until tension level is in the
normal range. Tighten the four fixed bolts of the engine.
10. TRANSPORTING / STORAGE
WARNING! To prevent to be burned or fire hazard, let the engine cool before we put
engine indoor.
10.1 Storage preparation
The correct storage preparation is the key of reducing the failures and
maintaining a good appearance. In order to start better in next time, please avoid corrosion to
impact engine.
10.2 Clean
If engine just stops working, you must cool it for at least half an hour before cleaning. Clean all
external surfaces, the metal surfaces easily rusted are coated with lubricant.
ATTENTION! The engine can not be washed with water to prevent water through the air
filter and muffler into the cylinder to cause damage to the engine.
10.3 Fuel
During storing, fuel is easily oxidated and deteriorated. Gum deposit in the oil circuit blocks oil
pipe, this will cause difficult start. During storing, if the fuel is deteriorated, you must maintain
or change carburetor and other circuit components.
Therefore, if storage is longer than 30 days, in last work, please let out fuel in carburetor and
tank or operate the engine till fuel uses up.
DANGER! Gasoline is flammable, even easily exploded in certain conditions.
Smoking, firing or sparking is prohibited in working site.
Long-period storage of rotary tiller
When rotary tiller needs be stored for a long period, the following measures should be adopted
to prevent tarnishing.
1 Wash oil stain and clean dust.
2 Drain lube oil in the gear box and refuel new oil.
3 Paint pickling oil on non-aluminum parts where there is no paint.
4 Store tiller in the dry, safe place where there is enough aeration.
5 Properly keep the attaching tools, certificates of conformity and instruction.
English
Owner´s manual
45