Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
Debug mal-
function
Adjust ope-
ration parts
Gears and
bearings
7. CLUTCH CABLE ADJUSTMENT
Usage and adjustment of clutch.
• Control power output of engine by clutch.
• When clutch handle is loosen, clutch is opened, the engine stops inputting power to tiller, tiller
blades stop rotating (Fig. 5).
•When we clench the handle lock, clutch is connected. In this condition, power is transmitted to
tiller, blades begin to work. (Look at picture 6)
8. THROTTLE CABLE ADJUSTMENT
Measure the free play at the lever tip. Free
play: 5-10mm (0.2-0.4 in).
If the free play is incorrect, loosen the lock
nut and turn the adjusting nut near or far as
you need.
9. BELT TENSION ADJUSTMENT
1. Adjustment of belt tensity
1.1 Normal range of belt tension degree is 25mm or so, when we loosen brake handle,
tension pulley moves upward to press tightly belt and transmission begins to work, when we
clench clutch handle, tension pulley moves down to make belt loosen, engine stops to input
transmission to gear box.
44
√
√
√
Throttle lever
Adjusting
nut
Lock nut
Publicidad
