Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
Remark: "0"shows maintenance content.
(1) Please maintain more in dust environment.
(2) Some of the projects may be maintained by authorized dealers, unless the user has
the appropriate tools and repair capacity.
1. Change lubricant oil
When the engine is still hot, let the oil out, so to ensure their rapid and thorough emissions.
1.1 Screw out the oil filler cap and bolts, let the lubricant out.
1.2 Screw down the bolt.
1.3 Put in the recommended lubricant again and check the oil level.
1.4 Put on fuel filler cap, engine lubricant capability should be 0.6L.
2. Maintenance of air cleaner
A dirty air cleaner may prevent air into carburetor. To avoid carburetor problems, regularly clean air
cleaner. Clean air cleaner more in heavy dust working area.
WARNING! Neither use gasoline or low burning point solvent to wash air cleaner element, or
this will cause exploding.
ATTENTION! Never run engine without air cleaner, or engine will be worn out fast.
2.1 Open air cleaner cap, take out foam and filter element.
2.2 Use household detergent and warm water to wash filter
element, thoroughly rinse. Also may use high-lighted
solvent to clean, then dry filter element.
2.3 Put filter element into clean engine oil, then squeeze out
the surplus oil, otherwise the engine will smoke thickly at
the first start.
2.4 Empty the oil in air leaner, use nonflammable or high-ligh-
ted solvent to clean the dust, then dry air cleaner.
2.5 Put the same oil as the engine oil in air cleaner, to the
standard height.
2.6 Assemble the filter element and air cleaner cover.
40
(1) Drain bolt
(2) Oil filler cap, (3) Upper lever
Publicidad
